Handrail holder stainless steel for screwing into the handrail_flat

handrail mounting
starting from 9,50 €

including 19% VAT., plus shipping (VK Kleinteile)

 

Description

* with 12mm thread and round cover chain
* Design suitable for round and straight support surfaces for hand?s runs

Holder dimensions:

  • Wall distance: approx. 70mm
  • Circular blank diameter: approx. 70mm
  • Height of the arc from the center of the circle: ca.65mm
  • Cap: Height 7mm - therefore even greener screws can be used
  • The three bores in the blank have a diameter of 8.2mm
  • Thread M12 Thread length approx. 20mm

Assembly:

  • Attachment: on the wall side with 3 different drilling variants
  • Cover stainless steel Rossette, is only lightly pressed on (very good)
  • Drill with a 10mm wood drill about 2,50cm deep blind hole
  • Then cut a thread into the hole with a 12mm metric metal tap (size 2 or 3)

The connection is very stable and is also often used in the commercial sector.

Additional services:

  • If you would like a support tray like the one shown in picture no. 3 (More pictures), please select above. The support shell is screwed onto the existing thread and fixed with a grub screw.
  • If you would like a handrail purchased from us to have a tapped hole made by us in the handrail for assembly, please select above.

We recommend two holders for one handrail up to approx. 2m, three holders between approx. 2 - 3m and four holders for longer handrails for optimum hold.


Haben Sie Fragen? Vielleicht finden Sie schon hier die passende Antwort.
» zu unseren FAQs

Ratings (0)

Write your first review and help others with their purchase decision:

Other customers have also bought the following items

Klick Sachsen
LiveZilla Live Chat Software