Handrail Pine - 45x80mm from 3,10m to 4,50m (rounded)

• rounded (Fig. 1): edges of the ends of the handrails are rounded
• bevelled (picture 2): bevelled edges of the handrail ends
• cut (picture 3): edges of the handrail ends just cut off - ends unpainted
• Cap wood (picture 4): with attached hemisphere - By putting on the end cap it can lead to slight color differences with varnished goods.
• Cap stainless steel: End cap only for handrails with 45mm diameter possible
• drilled: Should the handrail, e.g. want to connect with a handrail, then we like to drill the handrail frontally.

If you have selected "one-sided", the other side will be delivered "capped". However, if you, e.g. If "bored on one side" the other side is rounded, chamfered or with an end cap, please indicate this in the order process in step 2 in the comment box.

Further end caps can be found under accessories.

A groove is a cutout in the handrail. You only need a groove if you want to attach the handrail to an existing railing construction made of wood, glass, iron or steel. We only make one continuous groove. Please select the length corresponding to your handrail and specify the depth and width in mm in the free field. An exposed groove is possible only by means of an insert strip. If you need a flattening or a groove with insert strip, please contact us directly.

The delivery time is about 2 - 3 weeks

Please enter width x depth of groove in mm.

No mandatory field!

If you need a measurement for the length between the selectable dimensions, please select the next higher length at the top and enter the desired dimension here (for example 1755mm - selection above: 1800mm).

No mandatory field!